|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Engine intakes, exhaust, turbos, nitrous. |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
10-09-2001, 04:27 AM
|
|||
|
|||
|
replacing the ECU with a different spec one?
I have always wanted to know if this will work
some p11s are 110kw while mine one is only 96kw would it work if i replace my ecu with an 110kw version? is this gonna do any good/harm to the engine?
__________________
Patrick 99 Primera P11 One stripped down Primera 
|
|
#2
10-09-2001, 06:47 AM
|
|||
|
|||
|
Well, you won't get 110kW (150bhp) by just changing the ECU, I'll tell you that!
I doubt the ECU will do any harm as such, but I doubt it'll gain you much, if any, power on its own. You need to obtain the exhaust manifold and intake cam from a 110kW/150bhp Primera AND fit the ECU to get the full power levels.
__________________
Owner of Primeraweb, and a 1997 Nissan Primera SRi driver
|
|
#3
10-18-2001, 06:58 PM
|
|||
|
|||
new guy checking in
Hey guys/gals im new to the forum, I have a Primera motor in a us spec car and was wondering at what does the Primera GT redline at. I was thinking about purchasing an ECU from a GT and seeing if it would help me in performance..?
Any help would be appreciated...
__________________
92'XE w/Primera swap
|
|
#4
10-19-2001, 09:27 AM
|
||||
|
||||
|
Probably end up being more work than it's worth. You'll have to make absolutely sure all the wires are in the correct place on the ECU harness. Not to mention I don't think it will make any difference.
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
