Integra seats

[Dallas_Fl]

I got some integra seats and I got them mounted in the car but would to you guys recommand for useing as a seat belt? the bracket on the right side is connected to the seat and if I take it off the seat will come apart. what should I do

[FourthGenHatch]

Wha?

[Tony]

Originally posted by FourthGenHatch
Wha?

exactly

[FourthGenHatch]

Originally posted by Theodditie


exactly

For real.

I don't know what dude here is talking about but I use an electrical cord tied around the seat as a seatbelt, seems to work fine.

[Tony]

ghetto rig tha biatch

[Cjz89civic]

You guys make me laugh. Do you guys come from a trailer park? just get a bunch of zip ties together.

[slammed89civic]

well, if you have an 88-89 the the seatbelt clasps are connected to the floor, so you could just hack the ones off the teg seats and use your stock ones, BUT if you have an 90-91 the setbelt claps are connected to the seat rail, here is where you are going to have to do some ghetto rigging, you take off the seat rails from the old civic seats that have the clasps attached to them, and take the ones off the teg seats as well, now you will notice that the bolt holes dont line up, go out and buy a 1/2" drill bit and mark where the holes for the bolts should be by comparing the civic seat rails to the teg seat rails, then take a drill with the above mentioned 1/2" drill bit and drill new mounting holes on the old civic stock seat rails, after that it should work great, mine does.....if you have any more questions you can email me at: [email protected] for further assistance

[GTA]

Originally posted by Cjz89civic
You guys make me laugh. Do you guys come from a trailer park? just get a bunch of zip ties together.

dont forget the duct tape

[Tony]

man, duct tape can fix anything

[1PhatCX]

Yea Yea! Ghetto Style! haha:sun:

[slammed89civic]

oh yes, duct tape and bondo can fix most anything

[1PhatCX]

hell ya! Bondo does solve everything haha. we had a car in autoshop with a huge dent in the side, guess how i fixed it??? BONDO!!!!!!! haha we were supposed 2 bang the dent out and make it so we didnt have to use much bondo.... oops lol, noone was looking and i made too much so i used it all hehe, now theres a 50 pound fender on the car lol guess its a good thing the car wont run ever haha:sun:

[civicracer_1990]

I have a set of 96 ls seats that I use to have in my hatch before I got the si seats and I just took two vice grips and clamped the buckle on each seat.......another thing that works when the vice grip comes loose sometime get some "JB weld" and that will old usually for a couple weeks.......:huh: