??????

[mylittedaisy]

The s2000 motor is a f series engine, will an accord tranny bolt up, as of being the same series????????????????????

[jeelani]

I was wondering the same thing. I was also wondering if an s2000 f20 head could be put on an accord engine. The stroke on the accord is longer than the stroke on the s2000 so s2000 rods would need to be used. Would this be possible? Also could some parts of the s2000 be used on an accord engine?

[jeelanim]

Cmon, someone please reply.

[mylittedaisy]

The JDM f20b is from an accord. People say that you can switch parts from a accord and a prelude to this engine. The f20c is only one letter off. But I was looking on EBAY at a S2000 engine and the oil filter was on the exhaust side, the f20b is on the intake side. I think a tranny would bolt up but is there anywhere to bolt a motor mout on the drivers side?

[jeelani]

so if parts from accord and prelude engines could bolt onto a f20b, would that mean that parts could be swapped from a f20c? How could I get an s2000 f20c head onto an accord f22 block?

[diegoaccord]

The F20C head was made to have the dimensions of a SOHC cylinder head. And the blocks are not the same.