My intake won't fit

howard_w13 · #1 09-25-2001, 08:56 AM

Just got a used Stillen intake from a guy in Maryland who had a 200SX.
Unfortunately the adapter is not the correct fit on the intake so I need to know where i can get the right adapter to fit my car.:help: :help:

P10DET · #2 09-25-2001, 10:36 AM

Quote:

Originally posted by howard_w13
Just got a used Stillen intake from a guy in Maryland who had a 200SX.
Unfortunately the adapter is not the correct fit on the intake so I need to know where i can get the right adapter to fit my car.:help: :help:

It should fit. I don't believe Nissan changed the MAF in our cars at any time.

You may have to rotate the adpater/venturi/air horn. The holes only line up one way.

redvalkrie · #3 09-25-2001, 11:25 AM

On the 99G20t the maf is smaller and the whole's are aligned difrent.
2000+ differ greatly. I tried them side by side luckly we had a 99 & a 2000 on hand to see if the intkaes could be crossed over & no they don't fit on each other. the MAF on the 99 P11 is smaller than the 2000+P11 & then the hole's won't align.

I am not sure of the 200sx's but you might want to try tuner shops.

What year is your G p10, p11?

howard_w13 · #4 09-25-2001, 11:52 AM

Oops. Forgot to mention its a 1995 G20.

P10DET · #5 09-25-2001, 01:11 PM

Quote:

Originally posted by howard_w13
Oops. Forgot to mention its a 1995 G20.

The B14 intake should work with no troubles.

howard_w13 · #6 09-25-2001, 01:41 PM

B14? Don't know what that is. Where can I get it?

zykotik · #7 09-25-2001, 04:04 PM

Show me a pic of your adaptor...I had the same problem so I drilled the holes to the appropriate locations and cut this square of metal that was blocking the maf from getting a reading. Until I did that the car would barely start.

P10DET · #8 09-26-2001, 12:52 AM

Quote:

Originally posted by howard_w13
B14? Don't know what that is.

200SX

I was refering to the intake you have.

howard_w13 · #9 09-26-2001, 03:21 PM

Oh, uh, yeah, I knew that. I was just testing you P10DET

And as for Zykotic, here's a pic of the intake.

howard_w13 · #10 09-26-2001, 03:25 PM

And another pic

zykotik · #11 09-26-2001, 04:24 PM

Yup that won't fit. The circle needs to be bigger (or the maf won't get a reading) and the holes need to be drilled elsewhere...If it stops raining here I'll take a pic of mine and show you what I had to do to mine.

P10DET · #12 09-27-2001, 12:01 AM

I'm doubtful. I'm 98% sure the venturi for the B14 is the same as for the B13. I used a B13 Stillen intake on my P10. Same MAF.

Howard, am I right in thinking you're also in Houston?

hpro123 · #13 09-27-2001, 03:56 AM

Quote:

Originally posted by howard_w13
B14? Don't know what that is. Where can I get it?

B14 is the chassis/model designation used in the US for Sentra (or Pulsar/Sunny/Almera depending where U are) cars.

B14 == N15 == 1995-2000 Almera/Pulsar .

Chris

P10DET · #14 09-27-2001, 07:03 AM

Quote:

Originally posted by hpro123

B14 == N15

How sure are you of that? If they are the same, why do they have different platform designations?

howard_w13 · #15 09-27-2001, 08:39 AM

Quote:

Originally posted by P10DET
I'm doubtful. I'm 98% sure the venturi for the B14 is the same as for the B13. I used a B13 Stillen intake on my P10. Same MAF.

Howard, am I right in thinking you're also in Houston?

Close. I live in San Antonio. If need be, I can come to Houston for the next geekout and maybe some of the people there can help me put it on.

POST REPLY TO THIS THREAD