|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#1
11-26-2007, 11:51 PM
|
|||
|
|||
|
83 4wd 22r / camber problems
I have recently encountered camber problems, resulting in excessive wear on the inside of the tire. According to the Chiltons manual, camber problems on a 83 4wd pickup, are fixed by replacing the bushings. After replacing the bushings, it still has camber problems. any ideas how to fix this ???
|
|
#2
11-28-2007, 10:57 AM
|
||||
|
||||
|
Re: 83 4wd 22r / camber problems
Which bushing did you replace,the brass ones inside the axle?
A bent axle housing could also lead to camber problems.
__________________
84 4Runner - ARBed 5.29s F&R, 4.7 & 2.28 t-cases, Chevys, AP x-over, BudBuilt x-member, 2" drv trn lift, 36" TSLs, 30 spline Longs 80 something p/u - Buick 231 V6/TH-350 trans, Holley 4 bbl, Weiand intake, dual batts, dual tanks ... 89 4Runner - stock 2000 Isuzu Trooper + 2010 Sonata
|
|
#4
11-29-2007, 08:55 AM
|
||||
|
||||
|
Re: 83 4wd 22r / camber problems
Worn leaf spring and t-bar bushings would affect handling, not camber.
The brass bushings are the only one's I can think of that could possibly have some effect on it.
__________________
84 4Runner - ARBed 5.29s F&R, 4.7 & 2.28 t-cases, Chevys, AP x-over, BudBuilt x-member, 2" drv trn lift, 36" TSLs, 30 spline Longs 80 something p/u - Buick 231 V6/TH-350 trans, Holley 4 bbl, Weiand intake, dual batts, dual tanks ... 89 4Runner - stock 2000 Isuzu Trooper + 2010 Sonata
|
|
#5
12-01-2007, 08:19 PM
|
||||
|
||||
|
Re: 83 4wd 22r / camber problems
Its most likely your trunion bearings, or loose steering arms. the steering arms are used to set the preload on the trunion bearings inside the knuckle.
its the bearings on the top right  can be bought here
__________________
 1985 Toyota SR5 XTRAcab 4X4 SFA 2003 Toyota Tuntra T3 2003 Chevy Kodiak 4500
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
