|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
11-11-2007, 04:59 PM
|
|||
|
|||
|
88 lesabre 3.8 liter
i have a problem. my car died on the highway yesterday doing 50 and the engine light came on.so i bought a obd1 scanner and it gave me code
27 2 Gear Switch 28 3 Gear Switch 41 Cam Sensor Circuit the car is a 88 lesabre 3.8 liter any advice 
|
|
#2
11-11-2007, 05:59 PM
|
||||
|
||||
|
Re: 88 lesabre 3.8 liter
More than likely, you have a bad crank position sensor. The cam sensor will not cause a stall. The other two codes, could have been codes set when the engine cut off. BTW, you do not need an OBD1 scanner on this car. All you have to do is jump terminals A&B on the ALDL terminal to get the codes. Do a search for more precise instructions.
__________________
Knowledge can be communicated, but not wisdom!   
|
|
#4
11-12-2007, 03:45 PM
|
||||
|
||||
|
Re: 88 lesabre 3.8 liter
__________________
-Eric 89 LeSabre T-Type: CAI, STB, F41 Suspension, Moog Ball joints and tie rods, dual-out flowmaster and dual tips, Pointiac CD HU, Delco type 2 Ignition, etc. Basic H/C body info:http://www.3800power.bravehost.com/index.htm http://www.cardomain.com/ride/2318168
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
