|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
11-07-2007, 04:56 PM
|
|||
|
|||
No Brake Pressure
I Have A 91 Lesabre,i Repaired A Rust Brake Line With A Pressure Hose And Now After Bleeding The Brakes I Have No Brake Pressure On The Pedal When The Car Is Turned On,but Have Pressure When The Car Is Off.i Have Replaced And Bled The Master Cylinder I Don't Know What Else To Do Please Help. Thanks
|
|
#2
11-10-2007, 07:15 AM
|
|||
|
|||
|
Re: No Brake Pressure
It must be getting air in the line or not all of the air is bled out yet. Did you bleed each wheel starting at the left rear>right rear>right front>left front? Also, are you using one of those vacuum bleeders? They work great.
How were the brakes before the rusted line broke through? Was the master cylinder okay? Were the brakes working well?
|
|
#3
11-10-2007, 11:37 AM
|
||||
|
||||
|
Re: No Brake Pressure
Quote:
Welcome to AF's! What are you calling a "High pressure hose" If it's anything but a brake hose it will NOT hold up to the PSI that's required for brakes. Regards Dan
__________________
******************************************* Wiswind's Windstar repair pics http://community.webshots.com/album/201931518cScpNK Photos of my repairs: http://dansautopictures.shutterfly.com/ Check this out:http://threewheelmotorcyclemetro.shutterfly.co A must read about problems Windstars have: http://www.automotiveforums.com/vbul...d.php?t=672854 95 Windstar 240,000+ 98 Windstar 136,000+ 09-25-2008. 85 Dodge 1 Ton Snow mover gas hog 91 Mazda Protege free beater SW MN
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
