|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
10-31-2007, 12:56 PM
|
|||
|
|||
|
Ball Joints
Hey Guys,
I need to install lower ball joints on my 84 K10 4x4 truck, but not real sure exactly what will have to come off the axle to begin. I know the wheel, and possibly the brake caliper. Also, when I install the new ball joint, is there some special tool that is required for pressing into the axle? 
|
|
#2
11-01-2007, 12:56 PM
|
|||
|
|||
|
Re: Ball Joints
Yes there is to get the spindle off and it held in by 5 or 6 nuts wich are 9/16 or 11/16.Most parts stores,any Mac,Matco,Cornwell and Snap On tool dealer will sell the tool.Go with a moog ball joint,they have a lifetime warranty and will pay the labor.Do not get a cheap ball joint and there is one way to tell: Blue boot,cheap ball joint and a black boot,the high quality ball joint.
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
