|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Problem Diagnosis Got a problem you can't fix? Post here and one of our members will answer as soon as possible. |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#2
10-26-2007, 07:39 PM
|
||||
|
||||
|
Re: distributor question
Distributor shaft end play should be .010 to .015
It can be adjusted with shims. The distributor must be removed from the engnie, and the gear removed from the shaft to install the shims. 
|
|
#3
10-27-2007, 12:52 AM
|
||||
|
||||
|
Re: distributor question
Why are you asking, do you have a problem with the truck? Do you mean when your pulling and turning it up/out?
|
|
#4
10-27-2007, 05:13 PM
|
|||
|
|||
|
Re: distributor question
the play is with the dist. still in the truck. Has 99.6k miles on it. I just noticed when i had the cap off, what i thought was excessive play -up & down - in the shaft. Since it can be shimmed, are there replaceable bushings or any seals to be checked also?
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
