-
Grand Future Air Dried Fresh Beef Dog Food
Air Dried Dog Food | Fresh Beef

Carnivore Diet for Dogs

Go Back   Automotive Forums Car Chat > Toyota > Celica
Register FAQ Community
Reply Show Printable Version Show Printable Version | Subscription Subscribe to this Thread
 
Thread Tools
  #1  
Old 10-15-2007, 08:36 AM
Mister_S13_2's Avatar
Mister_S13_2 Mister_S13_2 is offline
AF Regular
 
Join Date: Sep 2007
Posts: 213
Thanks: 0
Thanked 0 Times in 0 Posts
Send a message via MSN to Mister_S13_2
3SGE header on 5SFE?

hey,hopefully someone out there can help me with this, I own a 1991 toyota celica SX(GT-something in the US) its a 5SFE powered one and im 16, in australia, your not allowed to do any performance mods while on your learners plates, so im looking for some budget ways to get my baby going better without looking suspicious under the bonnet.
i heard somewhere(cant remember where)that ST160 series 3SGE headers will bolt on, and are slightly better than the stock 5SFE items?is this true?i also heard that the 3SGE head will bolt on and will provide quite a gain, minus the slight water gallery difference,which can be fixed.any help would be appreciated.
__________________

NISSAN 2000GTR KPGC10 with...
Top-secret RB26 single turbo conversion.
Reply With Quote
  #2  
Old 10-28-2007, 02:31 AM
bbmx952 bbmx952 is offline
AF Newbie
 
Join Date: Sep 2004
Posts: 16
Thanks: 0
Thanked 0 Times in 0 Posts
Re: 3SGE header on 5SFE?

I do believe that Ive heard this to be true. But I cannot say for sure. What I can tell you though is that in my opinion is that for the power that you would get from doing this is not going to be worth doing in your current situation. I would wait until your able to modify your car and do this when your making other modifications. The reason I say this is that I don't think your going to get more than 10-20 more hp from this and this isn't just a one day job. I just recently had to remove my head on my 91 celica gt 5S-FE because my water pump went and my car overheated which caused one of my intake valves to get stuck open. It took one whole day morning to evening just to put it all back together. Taking it apart was the hard part that took a couple of weeks. I would recommend going down to an automotive store and picking up a repair manual so that you can see just what your getting into.
Reply With Quote
  #3  
Old 10-28-2007, 01:09 PM
Mister_S13_2's Avatar
Mister_S13_2 Mister_S13_2 is offline
AF Regular
Thread starter
 
Join Date: Sep 2007
Posts: 213
Thanks: 0
Thanked 0 Times in 0 Posts
Send a message via MSN to Mister_S13_2
Re: 3SGE header on 5SFE?

your probably right, i just wish i had more power! lol, yeh, i have a repair manual, and im an apprentice mechanic, ive done a few heads, i work for toyota, so ill just drag it into work if it need be done, altohugh, working for toyota, you would think i would know the answers to my own qestions wouldnt you? lol :P
but, at any rate, thanks for your help, i think ill take your advise, 10-20hp, is not worth it, no matter how desperate i am
__________________

NISSAN 2000GTR KPGC10 with...
Top-secret RB26 single turbo conversion.
Reply With Quote
 
Reply

POST REPLY TO THIS THREAD

Go Back   Automotive Forums Car Chat > Toyota > Celica


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 06:59 PM.

Community Participation Guidelines | How to use your User Control Panel

Powered by: vBulletin | Copyright Jelsoft Enterprises Ltd.
 
 
no new posts