1993 buick century valve lash adjustment

[kurfbird]

I have replaced the head gasket 3.3 liter buick century and TDC # 1 cylinder

I need the valve lash adjustment in other words what valves do I adjust in the number 1 position and then what valves I adjust in # 4 position.

I looked in my chiltons and on autozone web site. Which did not help

Thanks in advance.

[richtazz]

There is no valve lash sequence. It's a zero lash engine, and the rocker nuts are torqued to 28 ft/lbs. Make sure the push rods are seated in the lifters, put some assembly lube on the ends, and torque to the afformentioned value.

[kurfbird]

Okay thanks. Just did not want to mess up the motor.