|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
10-05-2007, 06:48 PM
|
|||
|
|||
|
How to identify engine
i have a friend with a 94 acura integra but he doesn't know which model. He's thinking it's the GS-R, but I don't know how to tell the difference other than I would assume VTEC to be written somewhere if it was. Is there some easy way to figure out which one it is? Thanks!
__________________
'01 Chevy Blazer ZR2 4x4 VIN=W '80 Yamaha XJ650 Maxim '08 Jeep Patriot 2.4L 
|
|
#2
10-05-2007, 07:14 PM
|
||||
|
||||
|
Re: How to identify engine
look at the engine code? or look for the Vtec solenoid
|
|
#3
10-07-2007, 08:25 PM
|
|||
|
|||
|
Re: How to identify engine
While standing in front of vehicle with hood open. look towards left side of
engine block. If it is a gsr it will have a stamp with b18c1 in engine block. also look to see if there is a emblem on the right rear below trunk, if it is a gsr it will have a silver emblem with dohc vtec. last look at the instrument cluster and see what the redline is. gsr's have a redline of 8k rpms.
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
