|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#1
10-04-2007, 01:38 AM
|
|||
|
|||
|
13B Turbo in N/a Chassis
Hi, I found a JDM 13B Turbo with tranny for relatively cheap and now I am looking at chassis to put it in. My question is this: Will everything match up if i drop this into an N/A FC chassis. Like the drivetrain, shifter, fuel systems, mounts. I am not familiar with the FC as I was an FB owner.
|
|
#2
10-20-2007, 04:23 PM
|
||||
|
||||
|
Re: 13B Turbo in N/a Chassis
it fits physically, and uses the same engine mounts, but you have to use the turbo transmission it came with and get a custom driveshaft that will fit the turbo trans and n/a rear because the turbo rear diff has a larger diameter input
you can also just swap over an entire turbo rear which is the best option if you ever want to build for power
__________________
RX-7 TII
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
