|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
08-21-2007, 05:39 PM
|
|||
|
|||
|
96 Regal ABS light on
The ABS light is always on when the car is running. ABS does not function. Ft sensors have 1.7k ohms resistance, rear sensors have 2.1kohms resistance. 5 volts at all sensor plugs. Apparantly this started as a flicker but was always on when I got the car.
Is there any way to get codes without a scanner? Is there any troubleshooting flow chart I could get online? Has anyone had a similar problem? Is there another module besides the one on the master cyl? If so where would I find it? Thanks, jb 
|
|
#2
08-21-2007, 07:04 PM
|
|||
|
|||
|
Re: 96 Regal ABS light on
Welcome to AF. The only was to diagnose this properly, after the resistance tests, the ft should be about 1020-1180, the rear 1030-1137. Is to scan it with an abs function scanner for codes and look at comparative wheel speed sensor inputs for the suspect area.
__________________
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
