|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#1
|
|||
|
|||
|
Fmic
my friend has the 1.8T 2003 MKIV. bone stock with newspeed Air intake.
he bough a big ass FMIC and we custom mad the pipes. the IC and pipes were an universal kit from ebay. we got it all hooked up and we had a problem. the car ran slower.... theres a sensor on the old SMIC and we left it un attached. could be the problem, what is that sensor. also, after we put the FMIC on the boost guage ead 15psi. would a bigger IC cause higher psi. and he explained how the car wouldnt let him go past 4K rpms at 15psi or something. pleas help, VW noob
__________________
GT2560r's, Nismo 615cc, ARP Head Studs, UD Pulley, SouthBend Stage5 clutch, 60mm TB's, Ash-spec Tune, Specialty Z 3" DPs, HKS intake, Energy Suspension, z1 Drive Shaft,E-fan, Port/Polished heads, AMS Manifolds, HKS SSQV BOVs, Howe Radiator, RPS segmented LW flywheel, UR OverDrive waterpump pulley, Billion Thermo, z1 silicone hoses, Stillen gauge pod w/autometers, D&S rotors all around |
|
#2
|
|||
|
|||
|
Re: Fmic
Anyone!
__________________
GT2560r's, Nismo 615cc, ARP Head Studs, UD Pulley, SouthBend Stage5 clutch, 60mm TB's, Ash-spec Tune, Specialty Z 3" DPs, HKS intake, Energy Suspension, z1 Drive Shaft,E-fan, Port/Polished heads, AMS Manifolds, HKS SSQV BOVs, Howe Radiator, RPS segmented LW flywheel, UR OverDrive waterpump pulley, Billion Thermo, z1 silicone hoses, Stillen gauge pod w/autometers, D&S rotors all around |
|
#3
|
|||
|
|||
|
Re: Fmic
someone has got to know.
__________________
GT2560r's, Nismo 615cc, ARP Head Studs, UD Pulley, SouthBend Stage5 clutch, 60mm TB's, Ash-spec Tune, Specialty Z 3" DPs, HKS intake, Energy Suspension, z1 Drive Shaft,E-fan, Port/Polished heads, AMS Manifolds, HKS SSQV BOVs, Howe Radiator, RPS segmented LW flywheel, UR OverDrive waterpump pulley, Billion Thermo, z1 silicone hoses, Stillen gauge pod w/autometers, D&S rotors all around |
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|