305 sbc, tpi setup, emissions stuff, oil pan (pics!)

[88camaroproject]

first item for sale is a stock 305 short block out of a 77 truck, it was a running motor and its complete from oil pump(minus pickup tube) to the lifters. i will sell that along with the timing chain cover which is painted black and has a new crank snout seal on it, the harmonic balancer, and 168 tooth flexplate for 100 dollars. local pickup in cocoa beach Fl.







-and if anyones interested i have the heads that were on the motor but they are disassembled and i also have some disassembled vortec 305 heads if any ones interested i can take some pics.

-next is the perimeter bolt valve covers with baffels that were on the 305. retro looking and painted chevy orange. 15 dollars plus shipping




-then i got a complete tpi setup. comes with everything seen in pics below. injectors probably need to be replaced. it came off a 85 corvette. i could sand blast the manifold, plenum, and runners clean everything else up for extra. $150 as is. $200 all cleaned up.



-i also have all the random emission stuff off a 85 corvette. there is a smog pump and all sorts of hoses and valves and i think a egr servo and a corvette computer controlled hei distributer, and maf sensor. corvette intake is sold.



-cast iron intake manifold. dual plane, came off the 305. $25 plus shipping(heavy!!)



-85 corvette oil pan $30 plus shipping, and exhaust manifolds with heat sheilds $50 plus shipping.






-last but not least, i have a c4 breadbox. its missing 2 of the metal mounts but if someone needs it i bet you could make it work. $20 plus shipping




Make offers if you dont agree with the listed price

Thanks-Tom