|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
06-21-2007, 10:46 PM
|
|||
|
|||
Help
I HAD THE ENGINE IN MY BOAT {CHEVY 350 1992}rebuilt about a year ago and it has just been sitting now i am redoing the boat any way the engine starts and runs fine good oil pressure at the gauge but if i stick my fingers through the valve cover breather holes or the fill cap it still feels dry like no oil is getting up there i ran it for about 1 hour total and its still dry any help would be greatfully appreciated thanks
|
|
#2
06-22-2007, 05:58 AM
|
||||
|
||||
|
Re: Help
You really may not feel any oil up that far. Can you shine a light into it? Unless they were bone dry, I wouldn't worry about it. The rocker arms would be clacking loudly and you'd also have appreciable lifter noise. You could always take off a valve cover if you care to, just going to cost you the price of the gasket and some time.
Bob
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
