|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Engineering/ Technical Ask technical questions about cars. Do you know how a car engine works? |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
10-28-2002, 05:39 PM
|
|||
|
|||
H22 swap distributor problem...NEED HELP NOW!!!!!
I have a 97 Accord EX (OBD II) and I bought a 96 engine swap (OBD I) for it. There is an issue with the distributor. The one on the H22 has two plugs and the one off my Accord has one plug...therefore, it won't fit. Can I wire the Accord harness to the two plugs on the H22 distributor? If so, how? Should I buy another distributor? I need to know as soon as possible guys. No offense, but I need knowledgeable, experienced answers for this one? Thanks
__________________
97 Accord EX Coupe (H22A) _____________________________ 18" Focal SD5 225/40/18 Kuhmo Ecsta Supra (712) AEM Cold Air Intake Walbro 255lph Intank Fuel Pump HP Racing Exhaust 2.25 Custom Piping Spoon Radiator Cap Katzkin two-tone Leather 3 JL Audio 10W3s Kenwood DPX-4020 Double Din 
|
|
#2
12-10-2003, 12:09 PM
|
|||
|
|||
|
Re: H22 swap distributor problem...NEED HELP NOW!!!!!
Im sorta having the same problem -
I have a 99 Prelude - that i just put in a obd1 motor in but im running a JDM obd2 computer and i changed out all sensors except for the distributor because im using a JDM OBD2 P72 ECU and it looks for the TDC sensor and the CKP sensor on the distributor and not on the crank like the USDM models - my question is that the 4 wires that once went to those sensors at the crank need to go into my distributor and i dont know the wiring color code for either - can anyone shed some light on this subject????
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
