Pull out Car Radio unit from 93 Camry sedan

[summerhill]

My car radio has problem, and I have to fix it or install new one. Does any body give me any ideas how to pull out this unit? I don't have service manual
Thanks!

[Brian R.]

There is a 1994 FSM linked in a sticky post at the top of this forum. The procedure should be the same as that shown in that manual.

[Mike Gerber]

Pull the u-shaped cover from the dash. There are 2 clips that hold it in at the bottom on both sides. Pull out from there. I find a j-hook tool or a dental pick works well here. Then you just undo the top portion of the u-shaped cover by pushing in slightly and down. At the top it hooks a bit under the upper dash panel. Then there are 4 screws that remove the radio and cage assembly from the dash. They are usually a special phillips hex washer head screw. Either a phillips screwdriver or a nut driver works fine. Once the 4 screws are out you pull the radio out a bit and remove the 2 modular connectors from the back of the radio along with the antenna connection. You can then unscrew the radio from the sides of the cage and take it out.

Mike