Posi???

[segrandam]

im trying to find a posi for my 95 3.4 bird im tired of doin
burnouts with 1 tire lol and im wanting to change gear ratio.
anyone know a place on the internet i could order this stuff
and any other help to get power out of my six banger..
thanks for any info

[macker914]

Put a V-8 in it!!!



I would go with bigger injectors and fuel pump, as well as reprogramming the computer.

I have not played with 6's too much, see what kind of cam you can get for it. That seems to do the trick!

[segrandam]

LOL thats a project for later on down the road
maybe an ls1 when i have a little more couldnt
pass the car up for the price and condition.
even with a 6 banger. it has a flowmaster 80 dual
outlet exhaust and some weird a$$ intake thats the
way it was when i got it so im plannin on changin
to k&n intake system.what about pullin the a/c
compressor off would that free anything up?
thanks for the help

[blindeyed]

eBay is your best best on getting a good deal on a posi unit. Try to find a Zexel-Torsen, they're the best bang for the buck.

Aside from that. The best mods you can start off with doing is an SLP cold air intake (my personal preference), headers, and a new cat-back. That Flowmaster is only hindering you, I'd recommend Magnaflow. You can pull the A/C and replace it with the A/C delete pulley, but you would be better off just getting a set of underdrive pulley's.

A good website with tons of 3.4L performance parts:
www.ftpp.net

Originally Posted by macker914

Put a V-8 in it!!!

I'm so sick of hearing that. He asked what he could do to his current engine.. not what engine he should put in.

[macker914]

Originally Posted by blindxeyed

I'm so sick of hearing that. He asked what he could do to his current engine.. not what engine he should put in.

...And I gave him an answer, , he knew I was joking, so get over yourself


Look out everyone........going to be a V6 shanking!!!!!!!

[bag91]

Originally Posted by blindxeyed

I'm so sick of hearing that. He asked what he could do to his current engine.. not what engine he should put in.

I think most of us were like that when we first joined....after 1000 posts he'll learn

[blindeyed]

Originally Posted by macker914

...And I gave him an answer, , he knew I was joking, so get over yourself


Look out everyone........going to be a V6 shanking!!!!!!!

Yes an answer that wasn't relevant to his question. I knew you were joking just as much as he did.. but when someone who has a V6 asks the best way to modify it, and the first response you give them is "Get a V8"... That's when you're not helping them any. If you don't have any good advice to give them that's relevant to their question, then you shouldn't be responding at all.

[instantkevin]

talk to forum member, FormulaLT1.... he has rear end parts. I think it actually sells them on a regular basis. I actually just bought a Zexel-torsen from him, 3.73s, and a 3" aluminum driveshaft.

...a reasonable guy, and makes sure everything is as-described.

[macker914]

Originally Posted by blindxeyed

Yes an answer that wasn't relevant to his question. I knew you were joking just as much as he did.. but when someone who has a V6 asks the best way to modify it, and the first response you give them is "Get a V8"... That's when you're not helping them any. If you don't have any good advice to give them that's relevant to their question, then you shouldn't be responding at all.

Whatever dude, you think I give a rat's ass what you think! Ha, you were wrong!! O, and, GET A V-8!!!

[instantkevin]

blindxeyed, he did offer some suggestions. there's nothing wrong with a little joke.

Originally Posted by macker914

Whatever dude, you think I give a rat's ass what you think! Ha, you were wrong!! O, and, GET A V-8!!!

macker914, let's grow up.

[blindeyed]

Originally Posted by macker914

Whatever dude, you think I give a rat's ass what you think! Ha, you were wrong!! O, and, GET A V-8!!!

Unless you want to take a vacation.. I'd suggest settling down and start treating people with respect.

Please refer to the community guidlines

[blindeyed]

Originally Posted by instantkevin

blindxeyed, he did offer some suggestions. there's nothing wrong with a little joke.

That he did.. But as a V6 owner.. I know first hand the frustration of having people constantly tell you that your car is slow and that you need to get a V8 instead. And it gets old, quick. I'm sure you know exactly what I'm talking about given that you used to have a 2.8 in your Camaro. I just think it's immature, and disrespectful.

[instantkevin]

Originally Posted by blindxeyed

That he did.. But as a V6 owner.. I know first hand the frustration of having people constantly tell you that your car is slow and that you need to get a V8 instead. And it gets old, quick. I'm sure you know exactly what I'm talking about given that you used to have a 2.8 in your Camaro. I just think it's immature, and disrespectful.

Yea, I understand completely. I was never told that in real life, but I have heard "put a v8 in it" way too much on the forums when other people are talking. It was funny for a minute, but it is old.

Correction: I had a 3.1, not a 2.8.... I wasnt that slow lol haha.

[ikeyballz]

i used to have a 2.8..

i think its midly funny :P cuz its technically true..

[blindeyed]

Originally Posted by instantkevin

Correction: I had a 3.1, not a 2.8.... I wasnt that slow lol haha.

Ah yeah, that's right. I forgot your's was a '90.