|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#2
04-03-2007, 11:54 PM
|
||||
|
||||
|
Re: 88 4Runner- Problems with stickshift
Welcome to the AF!
Please explain what you mean by "stickshift loose". If you mean it easily moves without doing anything to the transmission, then part of the linkage or shift levers or forks or whatever is broken.
__________________
Forum Guidelines:http://www.automotiveforums.com/vbulletin/guidelines.html "What we've got here is a failure to communicate" 
|
|
#3
04-04-2007, 02:09 AM
|
|||
|
|||
|
Re: 88 4Runner- Problems with stickshift
Stickshift will move "loosely" around outside of gears and with a little work can be pushed back into line but will pop out again repeatedly.
__________________
SJ 
|
|
#4
04-04-2007, 08:30 AM
|
||||
|
||||
|
Re: 88 4Runner- Problems with stickshift
2 possibilities, hard to tell from your description.
1. The shifter seat in the shifter mount is worn and/or the cup at the end of hte shifter (in tranny) is worn. Both are user replaceable. 2. The shifter itself is loose in the shifter mount. Less likely unless you've been messing around with it, trying to remove the shifter.
__________________
84 4Runner - ARBed 5.29s F&R, 4.7 & 2.28 t-cases, Chevys, AP x-over, BudBuilt x-member, 2" drv trn lift, 36" TSLs, 30 spline Longs 80 something p/u - Buick 231 V6/TH-350 trans, Holley 4 bbl, Weiand intake, dual batts, dual tanks ... 89 4Runner - stock 2000 Isuzu Trooper + 2010 Sonata
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
88 4Runner- Problems with stickshift
