Looking to Get rid of 90 Crx

[Crx Guy]

Ok so here is the deal. I got in over my head with a b16 swap. I apparently did not do enough research and I do not have enough exp to know what I am doing. So I am wanting to get rid of my head ache.

90 Crx
Wireing harness is not pluged into the computer.
The computer does not go with the harness but I had a friend who does wireing and engine swaps for a living get it close to being ready. He says all you need to do is test wire to computer and plug each in. He cost me money and I don't have the money to pay him to do it. So knowing that, if you can wire you can pretty much get this going on your own time.
The car was an auto but I riped out the auto shifter and I have the shift linkege so all you need to do there is put it in. I ran the battery (with some assistance) from the trunk (passanger side) to the engine. It is pluged in and power is to the car. As far the engine is concerned, when it was out of the car, we put a new waterpump, timing belt and a new stage 1 clutch in. My friend (who I mentioned earlyer) check some stuff in side the engine when we had it open and said every thing looked in order.
Now it is in the car. We cranked it and it sounded good. Did not notice any thing out of the ordanary.
I have put new plugs and wires on it, both performanceand and new distributer, New TPS you just have to put it on.
The front end of the car has new Springs, Control arm busshings, brakes, Rotors, Tires (barely used) and new AR Rimes. The seats are in less than ok condistion I guess but the inside is pretty clean.
So I think that is just about it. It is a great car its just I am tired of it now. I don't want to work on it any more. With what I have told about this car how much would it be worth? I want to get rid of it but I need enough money to get something else. I was thinking of getting a Motercycle.

Plz some one take this pain off my hands.


EDIT: Its an HF, Rust over the back wheel wells and underthe gas tank.
As far as price Goes I really don't know what to ask but it aint a junker. I guess 2k.

[ironman85]

how much? where r u? any rust on the frame/fenders? what model (hf, si, etc) ?

pics will help out a lot.


i am looking to buy a 90-91 crx so i am a bit interested

EDIT: i see in your profile your in Lancaster OH. so a 10hour drive is out of my range. but giving the above info will still help sell it.