2000 T&C Pulsating Brake Pedal

[Fred D.]

Hi,

I need help! I'm going crazy. My brake pedal is pulsating when applied. I have recently replaced the rotors (they've been turned and are true), I've replaced calipers pins and guides and new pads. I have checked the rotors for runout on the hubs and only have .002 runout (within spec). I have also replaced the rear brakes. Cut the drums and new shoes were installed. I still have a pulsating pedal.

What could be wrong? Please help.

Thanks,

Fred

[Mrbizness1]

Possible malfunction in the abs system. Other ideas here.

http://www.popularmechanics.com/how_...e/1272441.html

[Fred D.]

Originally Posted by Mrbizness1

Possible malfunction in the abs system. Other ideas here.

http://www.popularmechanics.com/how_...e/1272441.html

Thanks for your help. Good info!! I figured out my problem last night. I have two T&C's 1996 and a 2000. The Brakes on the '96 do not pulsate. The only thing I have not checked are the rear drums for runout. I should not have to I thought because I had them turnned. So I deceided to take the drums off of my "96 and try them out on the 2000. Guess what I found out?? The brakes do not pulsate with the '96 drums. I dont understand how the machine shop guy messed them up. But he did.

Thanks again,

Fred D.