|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
03-06-2007, 06:47 PM
|
|||
|
|||
|
truck will start then stall
put my truck in a ditch on its driver side water 6-10 inches in the cab...new lock key cylinder was installed(broke key in old when climbing out). truck will now start then stall right after.
|
|
#2
03-07-2007, 01:45 PM
|
|||
|
|||
|
Re: truck will start then stall
latest update we plugged in a tech II gm reader (my dad and i) when we go into the body control module(bcm) 3 codes came up one being the theft thing.I dont know how to get around it..If anyone knows lemme know lol thanks
|
|
#3
03-30-2007, 03:45 PM
|
|||
|
|||
|
Re: truck will start then stall
You probably allready fixed this, but you need to perform a security re-learn procedure... put the key in the ignition and turn to on (but not start). Leave it for 10 minutes (security light should go solid I think). Turn off for 10 seconds. Repeat this procedure twice more (for a total of 30 minutes) and then after that start the vehicle. That re-learns the new key/cylinder and you should be good to go.
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
