|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#1
01-24-2007, 03:23 AM
|
|||
|
|||
|
1993 350 chevy pu problem
replaced plugs n wires because of light show under hood n cap ,rotor,coil,fuel filter,it was running rough at first only at start up 4 the first 3 min. now it has no power ,and studers uder load.pulled plugs back out drivers side firing fine ,passenger side carboned up in 5 mile trip.any help out there?????????????????????????/// well found problem distribtor pickup coil was shot rebuilt the entire distrib and runs perfect!!!!!!!!!!!!!!! thanks for replys
Last edited by pop826; 01-25-2007 at 12:00 AM. 
|
|
#2
01-24-2007, 08:33 PM
|
|||
|
|||
|
Re: 1993 350 chevy pu problem
Get it wired right? Not being a smrtazz either,after 23 years,I'm still dumbazz enough to get them mixed up.Not to proud of that statement.
__________________
If it ain't broke.......screw with it till it is.  Even at a Mensa convention,
Someone's the dumbest person in the room.
|
|
#3
01-24-2007, 08:48 PM
|
|||
|
|||
|
Re: 1993 350 chevy pu problem
check to make sure there's not fuel leaks, the filter is on the right way and none of the wires have come loose or on the wrong cylinders.
__________________
67 chevy c 10 needs paint 01 mustang gt needs hp
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
