99 cHEV. BLAZER... IGN. PROBLEMS

[NUMCHUCK]

OK
I have a 99 Blazer...The starter has been changed...and so has the ig. swutch... It wont start with a key...the dash lights all come on..but nothing .

I took a remote starter and it starts right up...I was wondering if the lock clynder was bad..Anyone else have a problem like this?

[Blue Bowtie]

The other items in the circuit are the neutral safety switch and the body control module/theft prevention. The neutral safety switch is at the transmission.

[NUMCHUCK]

O.k. I'll check that..that was another thought...But the ing lock clynder isnt working right...the wipers still run when the key is removed....and there is no springing action when you turn it to the run position.

[DelCoch]

Originally Posted by NUMCHUCK

O.k. I'll check that..that was another thought...But the ing lock clynder isnt working right...the wipers still run when the key is removed....and there is no springing action when you turn it to the run position.

Just a wild guess here - but I would say the ignition switch needs replaced.

[Blue Bowtie]

I'd agree that the switch needs some attention. The fact that accessory power is still on with the key out is a problem.

[old_master]

Originally Posted by NUMCHUCK

O.k. I'll check that..that was another thought...But the ing lock clynder isnt working right...the wipers still run when the key is removed....and there is no springing action when you turn it to the run position.

Does the lock cylinder return to the proper position when you remove the key?