air suspension

[blkghst3]

any one have it and give info on who, how,what,when and where.

[Minitrucker88]

i sell air cylinder kits in phoenix, AZ. i know they will work on pretty much any car with a strut-based suspension. there are kits out there for hondas, acuras, mitsu, etc, but no g20's yet. basically, i offer a kit consisting of four air cylinders, electric valves, a 10 switch box, all lines and fittings, one compressor, and a 3 gallon air tank, and you can opt to add gauges, upgrade to multiple or larger compressors, or bigger tanks if you like. prices start at $2200. this setup would include everything you would need except for the mounts, which i may offer in the future. for now, there are some steel fab shops thta will make the mounts on a CNC plasma, and assuming all the measurments are right, have the potential to turn out very nice. if anyone is interested in an air cylinder kit, email me at [email protected] and we'll talk.

[P10DET]

Originally posted by Minitrucker88
i sell air cylinder kits in phoenix, AZ. i know they will work on pretty much any car with a strut-based suspension. there are kits out there for hondas, acuras, mitsu, etc, but no g20's yet.

I don't think that's true.

Jason Garrett Young had a set on his P10 G20 for a while.

[Minitrucker88]

really? is he from phoenix? and do you know if it was bags or cylinders? id be interested to see his setup.

[P10DET]

Originally posted by Minitrucker88
really? is he from phoenix? and do you know if it was bags or cylinders? id be interested to see his setup.

He's from Virginia. He used bags IIRC.

He has now removed them.

[Jason Garrett Y]

I have hydraulics (different than air bags)
10 switches, 3 wheel motion, side to side, front to back, seasaw, pancake, yada yada, 8 inch lift front, 12 rear, 3 batteries
right now, they are out of the car. I am working on the rack some. This is my first post to this board. wow, I can choose a smiley face that flips the birds at you? odd!!!!

I had cumulators on the setup so that it would ride smoother. It was all custom work. no kit

[Minitrucker88]

what brand are you running? i was thinking about running HiLow on my next car/truck. any preference?

[cas8_1999]

hey felllas i went to north tampa customs and got a price for my 99g air cylinders (god bless em) 2800 with install coming out the door front and back motion no side to side i know for a fact this is what i'm getting i'm not really into hydrolics and everything but i know this is what i want on my g from drinving the land rover wich has it on it i know its a sweet ride and as low as i want it was so off the hook i was in this slamed rover my friends in NJ and we were at a light on the highway so i had the switch off so we hitting the ground body of the car on the floor and some guy in a pathfinder wants to race anyway makee long story short i was passing this fool while i was rising it was so banging his eyes where like damnnnnn as i was driving i was sliowly rising via switch and passing him then when we hit the next light dropped it to the ground again

i love this i have to have it on the g i have to
i have one question should i get lowring springs for my car anyway anyway for the ormal ride hight at maximum height to still be low i dont want my rims to tuck i just want to when i lower it it sits right on the tire with like a fingernail worth of space so should i get springs and the cylinders or the cylinders will do
casual

[slickkedar]

hey guys, what is air suspension? whats it good for? is that like for crazy bouncin'??

[cas8_1999]

i'll let the guys here who know more about this explain this for you but no its not for crazy bouncin
thats hydraulics you are reffering to...!

[Minitrucker88]

cas-

the cylinders will directly replace the whole strut/spring combo, so there is no need to buy springs, it is one or the other. i would also recommend going ahead and paying for the individual 4 wheel control, because when you get a front-back set-up, you're only getting 2 valves, which mean that the fronts are Teed together into one valve, as are the rears. what all this means is that when you go around a corner, air can transfer freely from one side of the vehicle to the other, and you'll get a hell of a lot of body roll, which sucks.

and for the others asking about air susp. its besically the same concept as hydros, except on air, which generally rides better. (jason i know your thinking accumulators, lol) but yeah the beauty of air is that it can be setup as fast or slow as you want, and yes, you can hop on air. mt truck does, and so do many of my friends cars and trucks. i have a few friends with civics and integras that will do a standing 3 wheel about 1.5 feet, and will hop anywhere from a few inches to a full foot off the ground. HTH, hit me up with any other questions.

[Trag]

I know bags will be great on the back of the car since we have a slight camber from factory the wheels in the rear will tuck in nicely, but the front im not sure of because the fender is lined up with the tire (18x7.5) anyways im from miami fl, and theres this guy around town named powder that installs air bags, the whole set-bags,compressor etc... ready to play for only 1500 on any car....so guys i think 2200 or more is way too much for bags .....dont pay more then 1700, look around for prices

[Minitrucker88]

yes 2200 is more than a bag setup, but thats because its air cylinders, which is a completely different part, and much more expensive. i used to work at the Hack Shack/Excentrix Auto Ind., where we made bag kits for hondas, and i have to say that bag kits seem pretty shoddy to me. the problem is the side to side flex you get with an air bag vs the solid costruction of a cylinder. there is also the lift, you get about twice as much out of cylinders. hope this clears things up, im not out to rip anyone off.

[cas8_1999]

minitrucker so rto compare your kit as oppose to north tampa customs kit for 2,800 installed what should i ask them as far as their kit should i ask the name brands of the parts or what?

[Minitrucker88]

yes ask them what brand the cylinders and valves are, and make sure they use the metal fittings, not plastic. also, make sure the airline is D.O.T., and find out what size tank, and how many compressors this kit includes. if you want to post up what they have to offer, ill give my opinion on it, if ive used it before. i personally have used fabco and Mac valves, and i would recommend those. try to stay away from any aim/chassis tech valves. the cylinders aim sells are called Bimba, and those seem okay.