|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
|
|||
|
|||
|
back door removal
hello to all does anyone know how to remove the back doors?...ive been beating on the pins for a week and they arent moveing an inch.....any ideas?...thanks
|
|
#2
|
|||
|
|||
|
Re: back door removal
dutch doors or barn doors?
|
|
#3
|
|||
|
|||
|
Re: back door removal
sorry to all they are barn doors......
|
|
#4
|
||||
|
||||
|
Re: back door removal
Gotta love that rust and paint. You can remove the plastic trim cap on the outside of the hinge, add some penetrating oil to the two holes, and see if there is a lock pin or set screw inside.
|
|
#5
|
||||
|
||||
|
Re: back door removal
try using a heat gun to expand the hinge. it might take a couple of heating and cooling cycles to break it loose.
|
|
#6
|
|||
|
|||
|
Re: back door removal
__________________
CD 1991 W41 #142 1989 Caprice 9C1 1997 C1500 1997 Bonnie SE 1998 Olds 98 LS Recently updated: http://forums.b-body.org |
|
#7
|
|||
|
|||
|
Re: back door removal
Me and Billybob here we just done that the otherday.We backed up to a big ole tree in the yurd,got us a chain and we just put it arond the tree and the dour.Gave her sum gas and off she came,lots of room for the boat now.
Anyways,I had 2, the pins are a bisch coming out.If you have some time and some torches of some kind,you can build yourself a heat/shield to keep the flame off the body and just warm up the pin to drive it out.If you go with the shield/torch route the best way is to heat the hinge(not the pin) and then INSTANTLY shock it with a bucket of cold water.Quick shot with the hammer amd punch and out it should come.
__________________
If it ain't broke.......screw with it till it is. ![]() Even at a Mensa convention,
Someone's the dumbest person in the room. |
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|