|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
12-03-2006, 02:34 PM
|
|||
|
|||
|
door lock problem
I just installed a viper remote start into my 2000 rodeo ls. It has remote door lock conection. Now every time I unlock the doors with the viper remote the alarm goes off. If I start it first with the remote it is fine. Is there a way to disable the factory alarm or send some sort of disarm pulse to the alarm. Some paper work I have says the alarm disarm is a yellow/blue wire in the drivers kick panel I te'ed off the unlock signal to this wire but the alarm still go off any one have any ideas.
|
|
#2
12-03-2006, 03:52 PM
|
|||
|
|||
Re: door lock problem
well I just figureded it out. there are 2 white conectors in the drivers kick. The top one has a yellow/blue wire. you need to pulse this Neg to dis arm alarm. I just jumped of the door unlock works like a champ. hope this can help someone else out.
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
