|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Mustang Problem Diagnosis Got a problem you can't fix? Post here and one of our members will answer as soon as possible. |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
11-29-2006, 12:59 AM
|
|||
|
|||
Please HELP! V6 problem bad IDLE wont run
Hey everyone, I'm not familiar w/ fords but here I am doing a tune up on a 99 v6 mustang, gaped all the plugs exact and rechecked .054, new wires, went to fire it up before I went any further and now it runs like crap. It will barely even idle b4 stalling, smells like rotten eggs, and the cats are glowing. I dont know the complete list of problems w/ this car but I drove it in my garage w/ no problems other than slight lack of power. When I idle it up a little it'll stay running w/ a bad idle. wires are on perfect and no CEL, I have a obd reader and something about IAT sensor poped up, cleared it and now it wont came back up. ANY IDEAS? Thanks
|
|
#2
11-29-2006, 02:16 AM
|
||||
|
||||
|
Re: Please HELP! V6 problem
Are the wires on in the right order? I have seen where people completely closed the gap on the plugs trying to install them and pushing them against the head or exhaust manifold.
__________________
1969 Cougar 357w & TKO - 475hp
|
|
#3
11-29-2006, 10:50 AM
|
|||
|
|||
|
Re: Please HELP! V6 problem
no they are definately in the right order, and the gap was .065 on the old plugs which I thought was wrong, so the first time around I gapped the plugs at .054 didnt help, tried .064, worse, so I went back to .054.
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
