|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Problem Diagnosis Got a problem you can't fix? Post here and one of our members will answer as soon as possible. |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
11-26-2006, 06:49 PM
|
||||
|
||||
98 Blazer Drivers Power Window Sticking...
Hey Guy's
Has anyone here changed the driver side power window motor on a 95-2004 Blazer? Do I have to remove the window regulator? Thanks for your help... Dino
__________________
1998 BLAZER LS Vin-W 4Dr 2wd 2004 Cavalier LS 4Dr 2.2 Ecotec "Good Part's ain't Cheap--Cheap Parts ain't Good"  
|
|
#2
11-26-2006, 08:08 PM
|
||||
|
||||
|
Re: 98 Blazer Drivers Power Window Sticking...
Because it is sticking doesn't mean you have to replace the motor.
Remove the inner door panel and lube the slide assembly and it will fix the problem.
__________________
1995 Factory Blazer Service Manual for sale, PM if interested.
|
|
#3
11-26-2006, 08:24 PM
|
||||
|
||||
|
Re: 98 Blazer Drivers Power Window Sticking...
Thank's BLT, I did oil all the slide's today while it was apart, I should have explained myself a lil better. This the second time this has happened to me in a year, The window rolled down fine but never came back up. Almost seems like a dead spot in the window motor. I tapped it once lightly with a hammer and it's back to working normal again(for now). The last time it happened I parked it in the garage and the next morning it worked fine for 11 months. I don't want to press my luck any longer with winter right around the corner.
__________________
1998 BLAZER LS Vin-W 4Dr 2wd 2004 Cavalier LS 4Dr 2.2 Ecotec "Good Part's ain't Cheap--Cheap Parts ain't Good"
|
|
#4
11-27-2006, 07:20 AM
|
||||
|
||||
|
Re: 98 Blazer Drivers Power Window Sticking...
check the bottom rear rivit that holds the window regulator assembly to the inner door panel, both the drivers and passengers side on my new blazer are popped out. I believe this is what wore out the window motors on my truck, since it puts the whole assembly out of alignment and would put a larger load on the motors.
I'm not looking forward to replacing both of them, but I will probably be replacing all of the rivits with nuts/bolts on all 4 doors when I do so.
__________________
 1989 Mustang LX Coupe - ex 2.3/a4ld - 5.0/t5 conversion...with boost. 1991 Mustang LX Convertable - 5.0/AOD...stock 2001 Blazer LT 4x4 4dr 1980 BMW 320is beater
|
|
#5
11-27-2006, 08:53 PM
|
||||
|
||||
|
Re: 98 Blazer Drivers Power Window Sticking...
Quote:
__________________
1995 Factory Blazer Service Manual for sale, PM if interested.
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
