I have a 1995 NewYorker with the 3.5 V6 that is getting water in the oil. I recently bought the car and replaced the head gaskets about 3 months ago. I had the heads checked for cracks and warpage before replacing the gaskets and everything was fine. The only problem I had going back together was getting all of the air out of the coolant system. Once I finally got that done I had no problems until today when I checked the oil and noticed that it is getting water in the oil again. I have been checking the oil and water every couple of days since the car is still new to me. It has not been run hot and it has the right amount of antifreeze in it too. When the head gaskets where replaced I bought felpro head set and replaced all gaskets. I was just wondering if there is another way that water could be getting in the oil. Any help would greatly be appreciated.
11-21-2006, 08:06 PM
