|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Eclipse Problem Diagnosis Got a problem you can't fix? Post here and one of our members will answer as soon as possible. |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
11-16-2006, 10:21 AM
|
|||
|
|||
|
Engine bolt specs.
I'm trying to find the the head bolt torque specs for my laser... i'm replacing the headgasket... its where my oil is leaking, and i'm getting water in my oil... if anyone knows where i can get them, or has them please let me know
|
|
#2
11-16-2006, 02:21 PM
|
||||
|
||||
|
Re: Engine bolt specs.
Any Haynes or Chiltons manual will tell you everything you could ever want to know about it. You can pick one up at most automotive stores.
__________________
-Brian
|
|
#3
11-16-2006, 02:33 PM
|
|||
|
|||
|
Re: Engine bolt specs.
For your 1990 Plymouth Laser:
Head Bolt Torque Foot pounds (Final torque) Step 1 - Torque to 25 ft/lbs Steps 2 - Torque to 51-54 ft/lbs Recheck final torque in sequence Caution: Engine uses torque to yield head bolts (TTY) that permanently stretch during initial installation. New head bolts must be used when cylinder head is replaced or re installed to obtain proper torque specification
__________________
2007 Certified DaimlerChrysler Service Technician... True blue GM at heart.
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
