Automotive Forums .com - the leading automotive community online! Automotive Forums .com - the leading automotive community online!
Automotive Forums .com - the leading automotive community online! 
-
Latest | 0 Rplys

Stop Feeding Overpriced Junk to Your Dogs!

GET HEALTHY AFFORDABLE DOG FOOD
DEVELOPED BY THE AUTOMOTIVEFORUMS.COM FOUNDER & THE TOP AMERICAN BULLDOG BREEDER IN THE WORLD THROUGH DECADES OF EXPERIENCE. WE KNOW DOGS.
CONSUMED BY HUNDREDS OF GRAND FUTURE AMERICAN BULLDOGS FOR YEARS.
NOW AVAILABLE TO THE GENERAL PUBLIC FOR THE FIRST TIME
PROPER NUTRITION FOR ALL BREEDS & AGES
TRY GRAND FUTURE AIR DRIED BEEF DOG FOOD
Go Back   Automotive Forums .com Car Chat > Oldsmobile > Cutlass Series
Register FAQ Community Arcade Calendar
Cutlass Series Includes Cutlass Ciera, Cutlass Cruiser, Cutlass Calais, Cutlass Supreme, Custom Cruiser, as well as the GM N-Body subforums.
Reply Show Printable Version Show Printable Version | Email this Page Email this Page | Subscription Subscribe to this Thread
 
Thread Tools
Old 10-28-2006, 07:52 PM   #1
racerx300
AF Newbie
 
Join Date: Oct 2006
Location: hebron
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
94 cutlass idles rough acts as if its out of gas

hi ive got a 94 cutlass ciera with a 3300 v6 idles poorly acts as if its running out of gas if you give it very much throttle bucks and jerks no smoke or anything not sure if its maf sensor or cat convertor plugged or maybe even loss of fuel pressure check engine lite is on but im not sure how to retieve the codes with out a scanner any help would be appreciated
racerx300 is offline   Reply With Quote
Old 10-28-2006, 08:04 PM   #2
maxwedge
A990 racer
 
Join Date: Mar 2002
Location: Chestertown, New York
Posts: 17,051
Thanks: 26
Thanked 383 Times in 374 Posts
Re: 94 cutlass idles rough acts as if its out of gas

Welcome to AF. Check fuel pressure, 94 will probably need a scanner capable of scanning interim year cars.
__________________
maxwedge is offline   Reply With Quote
Old 10-28-2006, 08:39 PM   #3
racerx300
AF Newbie
Thread starter
 
Join Date: Oct 2006
Location: hebron
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Re: 94 cutlass idles rough acts as if its out of gas

well i pulled the codes have a number 26 and 34 codes besides the number 12 by passed the fuel relay have fuel at the rail squirts at first then just a steady stream not sur how normal this is i dont have a gauge so it makes it more difficult
racerx300 is offline   Reply With Quote
Old 10-29-2006, 10:21 AM   #4
maxwedge
A990 racer
 
Join Date: Mar 2002
Location: Chestertown, New York
Posts: 17,051
Thanks: 26
Thanked 383 Times in 374 Posts
Re: 94 cutlass idles rough acts as if its out of gas

No gage, no diagnosis! Actually 34 is a maf problem, make sure the connections are good to maf, if the fp is good replace the maf. 26 is another issue clear up your driveabilty problem first.
__________________
maxwedge is offline   Reply With Quote
Old 11-14-2006, 11:59 AM   #5
Dash1114
AF Newbie
 
Join Date: Nov 2006
Location: Kansas City, Missouri
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Re: 94 cutlass idles rough acts as if its out of gas

Sorry Im late with this but on the 3.3L the MAF can be cleaned I use Denatured alchol and clean with a q-tip the wires then I use dish soap with a q-tip to wash off any other residue then rinse with cool water to remove the soap.. These new MAF will last almost forever unless the wires break.. I had the same symptoms with mine and I cleaned it and reinstalled and now it works great.. Saved me 150.00 dollars on a new one..
Dash1114 is offline   Reply With Quote
Old 11-14-2006, 09:27 PM   #6
Ian Szgatti
AF Regular
 
Ian Szgatti's Avatar
 
Join Date: Aug 2006
Location: St.Catherines
Posts: 376
Thanks: 0
Thanked 0 Times in 0 Posts
Re: 94 cutlass idles rough acts as if its out of gas

Put a fuel pump in it. Even a used one that you can watch a guy bench test. I know this symptom all to well... it is the fuel pump. Don't worry about what the computer tells you. Once you replace the pump you'll be golden... dont forget to change your fuel filter at the same time. Not that you need it, but hey, if your going to be under there..

If you want to test the MAF, probe the reference voltage, should be 5 volts. connect it to the MAF, and probe the backside of the connector, at the same pin you should read 2.5V.
If you get the car running, lightly tap the MAF with your finger, or a screw driver handle, if the idle fluctuates, replace MAF.
Ian Szgatti is offline   Reply With Quote
 
Reply

POST REPLY TO THIS THREAD

Go Back   Automotive Forums .com Car Chat > Oldsmobile > Cutlass Series


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 01:14 AM.

Community Participation Guidelines | How to use your User Control Panel

Powered by: vBulletin | Copyright Jelsoft Enterprises Ltd.
 
 
no new posts