|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Problem Diagnosis Got a problem you can't fix? Post here and one of our members will answer as soon as possible. |
![]() |
Show Printable Version |
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
|
|||
|
|||
|
my 86 2.5L/manual trans. s-10 fuel guage was reading about 3/4 full when i had just filled the tank and 1/4 full when the tank was empty, the other day i hit a bump in the road and it stopped working all toghether and i cant find any info. what could it be. any help is much appreciated
|
|
#2
|
||||
|
||||
|
Re: 86 s-10 fuel guage problems
Sounds like a mechanical problem with the sender, like a binding float. Electrical problems are usualy on or off, not a misread. Fixing it requires dropping the fuek tank, not an easy job. Do a search on this and the Bravada forum, I've seen some good "how to posts" with some shortcuts. here's the Chilton R&R procedure:
http://www.autozone.com/servlet/UiBr...3d8012af79.jsp |
|
#3
|
|||
|
|||
|
Re: 86 s-10 fuel guage problems
thnx for the help, what would be easier, dropping the tank or removing the bed, the bed sounds easier but i could be wrong, is there more to the bed than the taillight wire harness. thanx again
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|