new air filter

[96eclipsegsx06]

i recently bought a air filter off of ebay. when i took out the stock air filter box and put in the new air filter it sinks down alittle and ratles when i drive. i am wondering if there is wnything i can do to support the air filter so it doesn't rattle. right now i am using a piece of wire to hold it up but the wire makes it look cheap.

any help would be appreciated

[mike8818]

Originally Posted by 96eclipsegsx06

i recently bought a air filter off of ebay. when i took out the stock air filter box and put in the new air filter it sinks down alittle and ratles when i drive. i am wondering if there is wnything i can do to support the air filter so it doesn't rattle. right now i am using a piece of wire to hold it up but the wire makes it look cheap.

any help would be appreciated

Go to autozone and buy the right tube its like $25.

[Thor06]

Get a K&N and be done with fuckin around.

[Blackcrow64]

Originally Posted by Thor06

Get a K&N and be done with fuckin around.

Watch your f*ckin mouth before I ban you!

[Black99GST]

Originally Posted by 96eclipsegsx06

air filter off of ebay. right now i am using a piece of wire to hold it up but the wire makes it look cheap.

it WAS cheap... its only going to look worth a million Bux, if you pay for it IMO

for the K&N!

[eclipsed at 3am]

just make some type of bracket with shiny metal and all. on my 1g i hacked the airbox, i pretty much cut it all up except where it bolted down, so it supported the airfilter and evrything nicely, and still looked pretty good.