|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#1
10-16-2006, 08:52 AM
|
|||
|
|||
|
Evo steering wheel
I know a while back there was a thread that was never anwsered if the evo steering wheel would fit on a 2g. So if anyone ever came up with the anwser i would like to know. I know that they were expensive but i found one on a wreck evo and the air bag is still intacked.
__________________
MODS , 2g pistons, cyclone intake manifold, ported 1g head, 60mm tb, greddy type s bov, apex-i n1 exhaust , ngk spark plugs, 3 angle valve job, autometer boost/vac, autometer air/fuel ,autometer oil pressure ,cross drilled rotors ,turbonetics boost controller ,air filter ,remove dump tube, 14b turbo and the ac still doesn't work and its been almost 3 years 
|
|
#2
10-16-2006, 08:54 PM
|
||||
|
||||
|
Re: Evo steering wheel
If you can get it cheap then why not just buy it and try it? If it doesn't work then you can always sell it for more than what you paid... Kind of a win win situation if you ask me.
__________________
-Brian
|
|
#4
10-17-2006, 04:00 PM
|
||||
|
||||
|
Re: Evo steering wheel
No it will not just bolt up.
__________________
"Life begins at 20psi"  97 Eclipse GST-X 5spd PTE 5031e/pte 880cc/vr4 fuel pump/Devils Own Water injection 12gph nozzle/pre turbo meth injection/fmic 28x10.5x3.5/greddy type-s bov/12" K&N/FP intake/dsmlink/gm 3.3 bar/maft/blitz ebc/act 2600/act 6 puck/SS Clutch line/3" turboback.
|
|
#5
10-18-2006, 09:41 AM
|
|||
|
|||
|
Re: Evo steering wheel
ok that was the anwser i was looking for but thats not a bad idea
__________________
MODS , 2g pistons, cyclone intake manifold, ported 1g head, 60mm tb, greddy type s bov, apex-i n1 exhaust , ngk spark plugs, 3 angle valve job, autometer boost/vac, autometer air/fuel ,autometer oil pressure ,cross drilled rotors ,turbonetics boost controller ,air filter ,remove dump tube, 14b turbo and the ac still doesn't work and its been almost 3 years
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
