350 vs 383

[olde man]

Hello all I would like to know if there is a big difference in the torque of a 350 as opposed to a 383 to make it worth doing? pros & cons please.

Thank you all

[wrightz28]

A 383 in most sense is a fully bored and stroked 350.

Difference is without any other power adders, you've implroved the valumetric efficiency of the 350 for more torque.

[96_9c1]

These guys will give you a better idea on what to expect

http://impalassforum.com/cgi-bin/ult...=1;DaysPrune=5

[96capricemgr]

Heads are the key to power, don't bother with a stroker unless you are willing to do the heads too which depending on which 350 you have that may mean something aftermarket or might just mean porting. Also be prepared to have to deal with the computer if so equipped.

[olde man]

There must be more with words of wisdom,please share them,Anyone?

[96_9c1]

Originally Posted by olde man

There must be more with words of wisdom,please share them,Anyone?

Your not going to find the information you want/need on this site. Its a great place, but not to many people on this site have done what you want to do.



http://impalassforum.com/