94 Z28 and i need some more horses for cheap

[Zcox99]

Hey i have a 94 Z-28 6-speed manual. The only thing ive done to it is put on a custom 80 series flowmaster exaust system. I need some more horses cheap....anyone have any ideas?

[ikeyballz]

okay hurry and delete this post! before everyone attacks your for putting on flowmasters! jk. it is however one of the worst flowing mufflers available..

how about..
cutouts? cold air intake? 160 stat, turn on fans faster...

of course just taking care of the thing works too.. new tune up.. full synth..

[FormulaLT1]

You can start off with the freebie mods. TB bypass , IAT relocator , then move do the suggested mods above and include a air foil and a pcm tune. That will give you a nice kick in performance.

[Zcox99]

I did just get a tune up about 500 miles ago, and im running all synthetic. So ive got that covered. I wasnt too sure how much cold air would do though, ive heard alot of good things about them, but i wasnt sure if it would give me much power.

[cuda_dude]

you can read the mods in my sig... thats pretty much most of the small too medium sized mods... A cold air intake is a nice start... add a new intake elbow and an airfoil to that and you have pretty much your whole intake setup done

[97cavalier]

how manny miles are on it? did u replace the fuel filter and clean the trottle body?

[Zcox99]

I have 80 thousand on it, i replaced the filter, but i havent cleaned the throttle body yet...i didnt know how hard of a job it would be

[97cavalier]

all you have to do is take the intake tube off where the tube meets the throttle body and take a lint free rag and some throttle body cleaner and wipe it all out, make shure you open the it all the way open and clean in there also. Just make shure you don't get to much cleaner in the sensor. I would get the star tool and take the sensor out and clean it with a rag only. you will have alot better throttle response. also run some fuel injector cleaner throught it.