help with my vafc hook up for mini-me with pm6

[Baumann_Yayo4G]

i have a mini me swap all done and running...is a daily driver and i have to keep it below 3000 so i don't fuck my engine...so for now im gonna have my apexi vafc hooked up(power only) and keep it all obd-0 untill i can afford a p28, jumper and enything else that i need....so yess i will be doing that ..eventually1 but right now i need some help.!it runs good but better will be nice...but that will all be tuned to perfection...but before i bring it in to get done..i would like to have this vafc hooked up.---i have power ..as i took the red and orange and hooked them up to a main relay from the ecu(yellow/black) and the black and brown and hooked them up to a ground..from the ecu..i did them right how it said in the manual...but thats as far as i got...now i need to now were these wires left over from the apexi vafc go!!! like what colour wires and the purpose because i have looked at the pin-outs for a pm6 and i can't put enything together.....

-green-(rpm signal) Goes to what pin?
-Gray-(throttle signal)-?
-blue-(vtm signal input)...but do i have one?
-Purple-(vtec sol. input)-?
-pink-vtec sol. output)-?
-yellow-pressure signal output)-?
-white-pressure signal input)-?

These are the wires from the vafc that i don't know were they go..i am running with a stock pm6?
help would be awsome guys...thanks
oh the head is z6!

[2poor2tune]

try the apexi website. they have simple diagrams that are easy to find out how to do everything. good luck

[Baumann_Yayo4G]

see thats the thing i have been to the website and i have downloaded the manual BUT it only has instructions on how to hook up a vafc to a vtec ecu ..like a p28...but i have a non-vtec ecu?? so i need to know how to kinda hotwire it...ya no what i mean...i have the pin-outs for my pm6 but i have know clue as to where the rest of the wires go, comming from the vafc????help?...in the meen time i am saving for a chipped p28 my buddie has and im looking for a 5th gen civic to cut the harness. and im gonna make my own adapter for the obd-0 to obd-1 swap....any good help would be really nice right now...thanks dudes~!and dudets!