|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#1
08-16-2006, 08:25 PM
|
|||
|
|||
|
00 Accord - Heater Fan Speed Problem
Hi,
Just bought a 00 Accord. What a beauty. I need halp with the heater fan. The first and the second speeds of the fan conterl are not working. 3rd, and 4th working OK. Can anybody tell me please how should I fix this issue? Than ks in advance 
|
|
#2
08-17-2006, 04:31 PM
|
||||
|
||||
|
Re: 00 Accord - Heater Fan Speed Problem
Here's my guess.
On my gf's pontiac grand am, she lost low speeds speeds 3 and 4. It turned out to be the blower motor resistor that was bolted to the firewall under/behind the glovebox. Apparenlty the stock resistors were not coated in any waterproof coating. So whenever humidity gathered on the metal firewall, and dripped down, it would soak the resistor. Found the replacement (which was waterproofed) at autozone for $20. Again, I'm thinking it's the same problem, but I honestly don't know where the resistor is located on an '00 Accord. You could try getting a service manual from either Autozone or downloading one here. Or maybe someone can chime in and tell you where it is. I basically just bought the replacement, and then looked around under the dash/glovebox, until I found an identical looking part.
__________________
96 3000gt vr4 -K&N FIPK -Proboost mbc -Cusco front + rear strut bars -Greddy type-s -ATR downpipe -no cats -15Gs, 3sx aluminum pulley, FMIC, SAFC, walboro pump, EVO 560ccs, and Meth Injection Kit all waiting to go in shortly. Your 1996 Mitsubishi 3000GT VR-4 is the 92nd out of the 315 that were made that year. Only 21 of which are exactly identical.
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
