|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
|
|||
|
|||
|
Good morning all. I've discovered that my seat is only held in place by two of the four bracket tabs. My research has shown me that this is a common problem. It appears the be the seat height? brackets that have broken off. Can someone tell me if that have gone through the same problemand or is there a recall on this fault?
1993 Lumina APV Non-power seat. Thank you |
|
#2
|
|||
|
|||
|
Re: APV Seat mounting Structure
My 1995 seat adjuster broke also. I wired it down.
Probably very common at 10 years. Don't know of a recall. These vans are full of these type of things. Door handles, headrests etc. But they just keep running. |
|
#3
|
|||
|
|||
|
Re: APV Seat mounting Structure
Thanks for the reply.. I've tried to find a used one but there all broken in the same place up here. Left front and right at the adjuster lever. Then the seat leans left.. I've found a new one for $600+ I think I'll just have is welded and streghtened..
Thanks again.. |
|
#4
|
|||
|
|||
|
Re: APV Seat mounting Structure
I just replaced mine with regular passenger seat brackets.
|
|
#5
|
|||
|
|||
|
Re: APV Seat mounting Structure
Well I never thought of that. Probably alot cheaper that what I was quoted.
Thank you.
__________________
+==================================+ 1993 Ford F150 300 4.9L 2wd ![]() 1994 Nissan Altima GXE 2.5L DOHC 5-speed |
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|