94 Explorer No power/start

[Dak47]

Greetings All,
Have utilized the forum on a few occasions to "remedy" problems with my Explorer, but the latest problem is a real head scratcher.

Three days ago went to start the vehicle, got a series of "clicks" and then nothing. Checked battery (low) and tried boosting but nogo. Battery was replaced with new one, starter relay on fender wall was replaced. Put in a new positive battery cable (went 1 gauge for good measure), cleaned all ground points, checked/cleaned fuses, relays, etc.

No power to interior lights, no battery function when key is turned, no ignition power when key is turned. I tried crossing the starter relay posts and it fires (not runs), lead from positive post to ignition terminal turns starter.

Ideas and suggestions most welcome.

Aug. 16/06
Have "fixed" the problem. I actually had reversed one of the leads to the starter relay which gave me the "no power" situation. My own fault for rushing to get the job done!

[Dak47]

Just to let everyone know. I "fixed" the no power/no start situation. It would seem that I had reversed one of the cables to the starter relay in my rush to get the job done! Lesson: take the time to do the job well AND label those leads and lines!!