|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
|
|||
|
|||
|
I removed half of the rt cv axle but can't get the other half after the bearing. can someone help me out. 1990 camry 4 cy.
|
|
#2
|
||||
|
||||
|
Re: can't remove rt cv axle
Check the FAQ thread for information on how this was done on newer Camrys. Maybe there is some useful information.
__________________
Forum Guidelines:http://www.automotiveforums.com/vbulletin/guidelines.html "What we've got here is a failure to communicate" |
|
#3
|
|||
|
|||
|
Re: can't remove rt cv axle
When I removed my passenger side cv axle I tried the pry bar method and didn't have much luck, therefore I used a brass drift punch and hammer. I gave the axle ( drift punch) two good wacks and it jumped out of the tranny. I think the sudden dynamic shock vs. a steady pressure from the pry bar works best after trial and error testing.
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|