P10 ABCDesign clear side repeaters

markypea · #1 08-12-2002, 07:27 AM

Right, this is seriously winding me up, fourth time I've typed this in. So now I'm going to copy and paste it in!!

I bought some ABCDesign Nissan Sunny/GTiR side repeaters from Halfords on Friday as I read on some website that they fit the P10.

"
Clear Side Repeaters

Got mine from Gtr performance for around £25, came with bulbs as well

I got mine from a Halfords with Ripspeed dept.£25.

Ah, that's beacuse you need the Primera ones. I can't remember the model code for the exact Primera model, but they are exactly the same as the Sunny/Pulsar

Q I want clear side repeaters?

Demon Tweeks part no : ABCN-300, description : Side repeaters SUNNY/PRIMERA clear pair (even says sunny GTI-R on the back) "

Anyway, they don't fit the Primera. They're too long. But with a Dremel you can cut off the back clip and about half an inch of plastic, and then cut in a new clip. Then fitted they are!! Look nice too. Just a heads up for people who are considering this option, and a 'Ooh don't you like my new clear side repeaters'!!

markypea · #2 08-12-2002, 09:24 AM

pics

Mark2k4 · #3 08-12-2002, 09:56 AM

Looks well smart, i take it`s a 1.6, did the panel filter make much difference as i`m considering one, but still can`t decide on a panel or make my own kit.

markypea · #4 08-13-2002, 05:52 AM

No!!!! It's a 2.0 16valve dual over head cam, 150bhp (plus whatever that K&N has given...150.1bhp probably), 0-60 in 8.3 seconds wolf in sheep's clothing thank you very much!!!!

The panel made the car more eager to pick up speed from lower revs, but it's barely discernable. When the oil pressure drops (so at 90 it's just over half way up the gauge, 90psi or something), then it seems to make the most difference, although that could be just cos the engine's nice'n'warm.

1.6!!!! ffs!!!

Primera-TDLX · #5 08-13-2002, 07:23 AM

Quote:

Originally posted by Mark2k4
Looks well smart, i take it`s a 1.6, did the panel filter make much difference as i`m considering one, but still can`t decide on a panel or make my own kit.

Hey dude, where did you get the 1,6 from?
It says 2.0eGT in his signature at the left, and you can clearly see that the front is a GT front, as for the side skirts too. He said it was original too, so it isnt a modded 1,6. (like mine, I`ve got a 2.0dLX with complete 2.0GT 95 front.)

markypea · #6 08-13-2002, 07:44 AM

Nice alloys.

If only my insurance wouldn't go sky high if I modded my car

Mark2k4 · #7 08-13-2002, 10:49 AM

Sorry, my bad, i was slightly drunk when i was replying, no offence intended, its just i drive a 1.6 and it must have gt kit on cos it looks a lot like yours, i`m surprised you didn`t but an induction kit rather than just the panel filter, i can guarantee you will be pleased with the results, i made one for mine this morning and it has totally changed the engine`s high rev noise, it normally sounds like a hoover but now it sounds a lot beefier, low end powre hasn`t improved but once it`s over 3000 revs it pulls a lot faster, something for you to think about.

markypea · #8 08-13-2002, 12:17 PM

If I add induction and remove the standard box then I go into the modded bracket and insurance goes through the roof. I would also lose the car's ability to defend water. Plus I love the fact that my car is currently quicker than those 'other' gti's and Kev boys, but doesn't sound loud and irritating. Each to his own, as I'm sure that on this forum my opinion is in the minority.

But then the GT's just a cheap stop gap until I've got enough for a GTR!! That'll be a very different story, dual K&N inductions!!

Mark2k4 · #9 08-13-2002, 02:20 PM

if your after a skyline you might want to see this
Nissan skyline

POST REPLY TO THIS THREAD