|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#1
06-25-2006, 09:13 AM
|
||||
|
||||
|
FS: 2" wheel spacers
A set of 4 2" spacers for putting fourth gen offset wheels on a thirdgen. They bolt onto the hub and then the wheels bolt to the spacers. Bought them from cjbargains on ebay. Only 2 weeks old. Bought some wheels and then found that a rim was bent. Asking $140 plus shipping. Has a set of lugs to mount the spacers and a set to mount the wheels. Also 2 weeks old.
__________________
92 z28 camaro 5.7 TPI current - slp intake runners and base-BBK 52mm throttle body-MSD 8.5mm wires, blaster coil, and 6AL Box-edelbrock headers-160 degree stat.-hotchkis strut tower brace waiting in the garage - LQ4, milled heads 317 casting (10.5 to 1), hardened pushrods, ported LS6 oil pump, manley dual spings with titanium retainers, MTI X1 cam, hawks longtube headers 
|
|
#2
06-29-2006, 07:59 PM
|
||||
|
||||
|
Re: FS: 2" wheel spacers
140 shipped?
__________________
92 z28 camaro 5.7 TPI current - slp intake runners and base-BBK 52mm throttle body-MSD 8.5mm wires, blaster coil, and 6AL Box-edelbrock headers-160 degree stat.-hotchkis strut tower brace waiting in the garage - LQ4, milled heads 317 casting (10.5 to 1), hardened pushrods, ported LS6 oil pump, manley dual spings with titanium retainers, MTI X1 cam, hawks longtube headers
|
|
#3
07-26-2006, 10:05 PM
|
||||
|
||||
|
Re: FS: 2" wheel spacers
100 plus shipping?
__________________
92 z28 camaro 5.7 TPI current - slp intake runners and base-BBK 52mm throttle body-MSD 8.5mm wires, blaster coil, and 6AL Box-edelbrock headers-160 degree stat.-hotchkis strut tower brace waiting in the garage - LQ4, milled heads 317 casting (10.5 to 1), hardened pushrods, ported LS6 oil pump, manley dual spings with titanium retainers, MTI X1 cam, hawks longtube headers
|
|
#4
08-24-2006, 12:11 PM
|
||||
|
||||
|
Re: FS: 2" wheel spacers
still up for grabs?
__________________
2002 Mustang GT ( 4:10 gears, X pipe, cat back, CAI, Under drive pulley set, Intake plenum, throttle body, Tuned) 13.7@101mph https://youtu.be/btMHZeoZTS0 https://www.youtube.com/channel/UCeu...PX2WMqty2z4aPw 2015 Jeep renegade trailhawk 2017 VW Jetta TSI 1.8T 
|
|
#5
08-24-2006, 03:04 PM
|
||||
|
||||
|
Re: FS: 2" wheel spacers
Sorry they are sold.
__________________
92 z28 camaro 5.7 TPI current - slp intake runners and base-BBK 52mm throttle body-MSD 8.5mm wires, blaster coil, and 6AL Box-edelbrock headers-160 degree stat.-hotchkis strut tower brace waiting in the garage - LQ4, milled heads 317 casting (10.5 to 1), hardened pushrods, ported LS6 oil pump, manley dual spings with titanium retainers, MTI X1 cam, hawks longtube headers
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
