|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#1
06-24-2006, 05:46 PM
|
|||
|
|||
|
Is there a MAF on a '93 LT1?
Hey all, I've recently bought a 93 z28. It seems to be running rich (smelly exhaust, poor milage even for a 350, etc) The motor is newely rebuilt, so there aren't any internal issues....Question is, When I did my CAI install, I noticed there wasn't a MAF. There is, however, a male ended electrical harness in the area I would expect the MAF to be....Any ideas? Did the 93 have MAF's? My research is inconclusive so far...
Thanks, Tim 
|
|
#2
06-24-2006, 05:49 PM
|
||||
|
||||
|
Re: Is there a MAF on a '93 LT1?
I don't think it's a MAF but it is similar in functionality. I don't remember what it is though...
__________________
1994 3.4L Chevrolet Camaro - No more 2006 Hyundai Sonata
|
|
#3
06-24-2006, 06:11 PM
|
||||
|
||||
|
Re: Is there a MAF on a '93 LT1?
No 93 was the only year LT1 F-body that was not a MAF system, it only used a Map sensor to register manifold pressure but all other years (94-97) used both MAF and Map to get a accurate read on incoming air.
__________________
RIP Hypsi - I just want to express I will never be the same after having lost such a good friend. You meant alot to me and I feel I am a better person for having known you. Til the day we meet again my friend you will always be in my heart. Mods: Weight reduction (I don't wear underwear) Last edited by FormulaLT1; 06-26-2006 at 12:20 AM.
|
|
#4
06-24-2006, 07:59 PM
|
||||
|
||||
|
Re: Is there a MAF on a '93 LT1?
what he said... it's speed density
__________________
97 Camaro - 2.077 60', 14.745 @ 92.20 - still down, one year later. 194k miles-160* thermo-V8 shocks/springs (V6 rear springs)-3" Magnaflow !cat (3" dynomax bullet) back-SLP CAI-stock boxed LCAs-poly tranny mount and torque arm bushing-custom HPTuners tuning-4.10s/eaton/TA girdle-3.5" alum DS-spohn LCA brackets-prostar skinnies 179.75 RWHP, 204.52 RWTQ ON ITS WAY: MORE R.I.P. Andy 87 Benz 190e - DD 01 EX250 - still gotta get my license for this thing
|
|
#5
06-25-2006, 08:29 AM
|
|||
|
|||
|
Re: Is there a MAF on a '93 LT1?
thanks for the info, guys, i appreciate it!
|
|
#6
06-25-2006, 06:01 PM
|
||||
|
||||
|
Re: Is there a MAF on a '93 LT1?
your mother appreciates it.....
Im just messin' with ya. 
__________________
92 z28 camaro 5.7 TPI current - slp intake runners and base-BBK 52mm throttle body-MSD 8.5mm wires, blaster coil, and 6AL Box-edelbrock headers-160 degree stat.-hotchkis strut tower brace waiting in the garage - LQ4, milled heads 317 casting (10.5 to 1), hardened pushrods, ported LS6 oil pump, manley dual spings with titanium retainers, MTI X1 cam, hawks longtube headers 
|
|
#7
06-25-2006, 06:03 PM
|
||||
|
||||
|
Re: Is there a MAF on a '93 LT1?
im sorry I shouldnt of put that....
__________________
92 z28 camaro 5.7 TPI current - slp intake runners and base-BBK 52mm throttle body-MSD 8.5mm wires, blaster coil, and 6AL Box-edelbrock headers-160 degree stat.-hotchkis strut tower brace waiting in the garage - LQ4, milled heads 317 casting (10.5 to 1), hardened pushrods, ported LS6 oil pump, manley dual spings with titanium retainers, MTI X1 cam, hawks longtube headers
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
