|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
06-04-2006, 11:38 AM
|
|||
|
|||
|
Uim/lim
Here is my question for the day. Sense I'm not a engine guy and don't own a repair manual.... Are either of the bolts for the LIM/UIM TTY blots? I'm going to be doing LIM gasket cuz I'm bored and interested to see if they are shot.
__________________
|
|
#2
06-04-2006, 12:26 PM
|
||||
|
||||
|
Re: Uim/lim
TTY, I don't think so Troy. Not enough torque anyways on any of the UIM/LIM bolts. It is really up to you. On the LIM bolts it is highly recommended to get new ones but not necessary. You could re-use the old ones with no problems but all old threadlocker has to be removed first. I let mine soak in fuel injector cleaner overnight and took a small brush to them. Use blue threadlocker only or GM 272, PN # 12345493. Good luck!
__________________
'08 Pontiac Grand Prix GXP (Dark Slate Metallic) - LS4 5.3L V8 '02 Oldsmobile Alero GL2 - LA1 3400 V6 '99 Buick Regal LS - L36 Series II 3800 V6 '03 Honda CR250R MX - 2 Stroke 250cc '97 Pontiac Grand Prix GTP - L67 Series II 3800 V6 Supercharged (Sold) Timeslip 08/12/06 AF Community Guidelines
|
|
#3
06-04-2006, 08:59 PM
|
|||
|
|||
|
Re: Uim/lim
I didn't think so either I reused my UIM when I did that. I take it the LIM bolts go into water jackets. Goning to do this when there is a nice cool week.
Troy
__________________
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
