Forgot what goes in the intake

[Eclipse4ever]

I put the new intake in and I cant remeber which cables go on the side of it. I am venting so I have the dump tube covered but I cant remeber what goes next to it in the next 2 next to it. Where do they come from ?

Also what do I use for pictures again ? Sorry but I wanted to post some pics of the progress and I cant figure out how.

Thanks

[Talon69]

Why don't you use the forums gallery to post pics? Its really easy

Step 1. Click on galley next to forum.
Step 2. On the right of the page next to upload picture click login.
Step 3. Click upload picture.
Step 4. After uploading picture click on gallery on the left side of page and click on the picture you uploaded and click on it.
Step 5. After clicking on picture just copy and past the picture to the post you want

[clipsekid99]

One is the nipple for the charcoal canister hose and the other is for the hose that goes to the the valve cover that people usually put a breather filter on. You don't REALLY need to plug both hoses onto the 2 nipples on the intake, they are only there for emmission. But since you do have an intake with the nipples, either plug the hoses back on, or plug up the nipples on the intake. My Dejon Tool intake doesn't have either holes, besides the dump tube for the bov, and I run fine.

[blk_srt]

one hose is for the pvc vent ang comes from the left side of the valve cover and the other is from the charcoal canister and comes from under the battery