|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Exterior and Wheels This is the place for all exterior wheel modifcations. |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
05-06-2006, 11:46 AM
|
||||
|
||||
Need suggestions please.
The clear plastic cover for instrument cluster has white dots on it like small specks. I presume from cooked on overspray from amor all and such. I have tried windex, the dishwasher and such to no avail. Is there another way to clean it off without damaging the plastic? Maybe an extremely fine grain of sandpaper?
These spots are driving me crazy. Any ideas would be appreciated. Thanks in advance. John
__________________
Eagalicious's 1997 Eagle Talon Tsi AWD  K&N FIPK 3rd gen lifters, installed  Apexi Turbo Timer w/harness!!! now to install Eibach Springs coming soon 3" turbo back with straight pipe. The muffler was the wrong one  Manual BC 1G BoV The rest is stock but not for LONG!! 
|
|
#2
05-06-2006, 12:57 PM
|
||||
|
||||
|
Re: Need suggestions please.
A really fine rubbing compound will work. I did this for the taillights on the Firebird at one time and it made them really clear and flawless looking again.
__________________
-Brian
|
|
#3
05-06-2006, 02:00 PM
|
||||
|
||||
|
Re: Need suggestions please.
Thanks. I will give it a shot
John
__________________
Eagalicious's 1997 Eagle Talon Tsi AWD K&N FIPK 3rd gen lifters, installed Apexi Turbo Timer w/harness!!! now to install Eibach Springs coming soon 3" turbo back with straight pipe. The muffler was the wrong one Manual BC 1G BoV The rest is stock but not for LONG!!
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
